I’ve been scheming up this project for over 6 months. Now that it’s winter break, I finally got around to working on it – and it was one of those projects that I’m kicking myself for not starting earlier.
The true purpose of this fireplace cover is functional, not decorative. Our wood-burning fireplace is an energy hog, drafting in cold air in the winter and hot air in the summer. During the winter, the floor in front of the fireplace is cold, and that half of the room is always quiet chilly. I looked into fireplace covers and insulation screens, and honestly, they were all pretty ugly. I set out to create my own.
I cut a piece of 1/4″ plywood down (using my new table saw – insert *girly, giddy screech*) to fit in the opening. Then, I cut down one inch thick styrofoam. (I bought it from Menards for $1.50, but knew I could have just saved up some foam from inside packaging and it would have done the trick as well. However, I refuse to save that stuff, because I hate all the little static-y balls it gets all over the house.) I used foam adhesive to glue it to the back of the plywood.
The front of the plywood got a coat of dark grey paint, and then came the fun part – making it pretty!
I actually had trouble finding full circle birch logs. I finally found a nursery by my school that carried birch yule logs, which ended up working perfectly. I cut them down into varying widths (between 1/2 inch and 1 1/2 inches). I’ve devoted a whole post to how to buy birch logs for cheap – you can check it out here.
I had originally planned to use liquid nails to glue the logs onto the plywood, but patience is not one of my strongest qualities, and after three hours of cooking the discs in my oven and still seeing some moisture rings, I couldn’t wait any longer. My second option was to use my nail gun to nail them down, which I was worried would be visible. I tested one log out, and you could barely tell it was nailed in. I went with option 2, and started nailing the logs down right away.
I used a couple of different lengths of nail to ensure each log was attached well, without nails hanging out of the back of the foam. The nail holes were so faint, that I actually couldn’t even tell which logs I had nailed down just by looking.
I had to tip it over a couple of times to see which logs fell out and still needed to be nailed.
Right now, it’s sitting in the fireplace opening, but I plan to put a latch on either side of the fireplace to hold it in place. Of course, it needs to be easily removable so we can still use it for fires!
Since I’m still not ready for Christmas to be over…
Like what you see? I’d love for you to follow along!
Linking up with these awesome parties!
Pink When | DIY Show Off | Making it in the Mountains | Refresh Restyle | Huckleberry Love | Finding Silver Pennies | Dwelling in Happiness | The Crowned Goat | 2 Bees in a Pod | Cedar Hill Farmhouse | My Uncommon Slice of Suburbia | Kammy’s Korner | Home Stories A to Z | Just a Girl & Her Blog | The DIY Dreamer | Saavy Southern Style | Dandelion Patina | Gingersnap Crafts | Knick of Time | Posed Perfection | Live Laugh Rowe | Canary Street Crafts | Addison Meadows Lane | Blue i Style | Craftberry Bush | Miss Mustard Seed | The Girl Creative | Little Miss Celebration | Redoux Interiors | Sew a Fine Seam | Craftaholics Anonymous | Dagmar’s Home | Tatertots & Jello | Funky Junk Interiors | House of Hipsters | Confessions of a Serial DIYer | Not Just a Housewife | Remodelaholic | Thrifty Decor Chick | C’mon Get Crafty | Oh My Creative | Our House Now a Home | Natasha in Oz